Step-by-Step Instructions for Best Experience
(Reference Model: Sony UBP-X800M2)
Select your Bluray model below:
STEP-BY-STEP GUIDE:
NOTE
Connect Sony Blu-ray Player (HDMI Out) to soundbar HDMI 2 or 3 (processing prioritized ports) with a HDMI-certified High-Speed 2.0 cable (18Gbps) for high quality video and audio. Recommended HDMI Cable >
For DTS:X support, ensure your Bluray player is certified to support DTS-HD Master Audio format.
For maximum stability, set YCbCr / RGB (HDMI) to Auto. See video setting space for detailed instructions >
NOTE
Connect Sony Blu-ray Player (HDMI Out) to soundbar HDMI 2 or 3 (processing prioritized ports) with a HDMI-certified High-Speed 2.0 cable (18Gbps) for high quality video and audio. Recommended HDMI Cable >
For Dolby Atmos support, ensure your Bluray player is certified to support Dolby Digital Plus format at minimum (Dolby TrueHD format for lossless Dolby Atmos audio)
For DTS:X support, ensure your Bluray player is certified to support DTS-HD Master Audio format
For maximum stability, set YCbCr / RGB (HDMI) to Auto. See video setting space for detailed instructions >
1. AUDIO OUTPUT
Press Home button on the remote >
Setup >
System Settings >
HDMI Audio Output >
select Auto
2. AUDIO FORMAT
Press Home button on the remote >
Setup >
Audio Settings >
Digital Audio Output >
select Auto
> (set BD Secondary Audio to OFF to enable Dolby Atmos audio output)
3. AUDIO SETTINGS
Press Home button on the remote >
Setup >
Audio Settings >
set DSD Output Mode to OFF >
set DTS Neo:6 to OFF >
set 48khz/96khz/192khz PCM to 48khz >
set DSEE HX to Off >
set Audio DRC to Auto >
set Downmix to Surround
Press INFO button on soundbar remote control to verify audio format received on soundbar (Dolby Atmos / Dolby Digital / DTS for best audio)
