top of page

Vizio TV 2020 Series

Step-by-Step Instructions for Best Experience
(Reference Model: M-Series)

Select the User Interface below that matches your TV:

vizio-m2020-audio-01-min.jpg
M-Series (2021)
vizio-m2020-audio-01-min.jpg
M-Series (2020)
VizioM502019_hdmi_01.jpg
M50Q (2019)
Picture5.png
Older Series
audio-settings.png

Audio Settings

hdmi-cec.png

HDMI CEC Settings

settings

STEP-BY-STEP GUIDE:​

warning-2.png

NOTE

Refresh the soundbar to re-establish HDMI connection with TV after scheduled auto-updates.

  1. Unplug the AC power cord of soundbar from the wall outlet

  2. Wait for 2 mins to fully discharge the soundbar

  3. Plug the AC power cord back into the wall outlet

warning-2.png

NOTE

Connect TV's HDMI ARC to soundbar HDMI 1 ARC with a HDMI-certified High-Speed 2.0 cable (18Gbps) for high quality video and audio. Recommended HDMI Cable >

 

If your TV has been connected to a sound system previously, perform full reset on your TV to clear the cache >

1. HDMI CEC SETTINGS

Click on the arrow button at the sides of the image to go forward/backward for settings. (Click on image to enlarge)

 

Sequence:

  1. System > CEC

  2. System > CEC > Enabled

  3. System > CEC > Device Discovery

1. System

vizio-m2020-hdmi-01-min.jpg
  1. Power cycling can solve a lot of odd problems with Vizio TVs.

  2. First disconnect the TV’s power cord from the power outlet and leave it unplugged for an hour.

  3. Then press and hold the power button on the TV or remote for 10 seconds to drain out remaining power. Plug TV back into power outlet and power it back on. 

  4. For more information, visit here

select-you-soundbar copy.png
bottom of page